Introduction
When a vehicle doesn’t pass its MOT, the reasons are often predictable. Knowing the most frequent failure points helps used‑car buyers avoid costly repairs and stay within the law. This guide explains the typical causes of MOT failure and shows you what to look for during a pre‑purchase check.
Brake and Suspension Issues
Brake performance tops the list of MOT failures. Worn pads, glazed discs, or a leaking handbrake cylinder can all trigger a fail. Inspect the brake pads for a thickness of less than 1.5 mm and listen for any squealing or grinding noises. Suspension faults such as broken anti‑roll bars, worn bushings or excessive tyre wear also attract attention from the examiner.
Tyre Condition and Wear
Tyres must meet strict tread depth and side‑wall integrity standards. A tread depth below 1.6 mm, cuts, bulges or exposed cords will cause an immediate failure. Check each tyre with a tread depth gauge and look for uneven wear that could indicate alignment problems.
Lights, Signals and Electricals
All external lights must function correctly. Faulty headlights, rear‑light clusters, indicators or the number‑plate lamp are common culprits. Even a dim or flickering interior light can lead to a fail. Verify that every light switches on, is correctly aligned and is not discoloured.
Exhaust Emissions and Smoke
Excessive smoke or a failed emissions test is a serious MOT issue. A black, blue or white plume from the exhaust can indicate oil burning, fuel problems or coolant leaks. The MOT test includes a smoke test; if the vehicle produces visible smoke, it will not pass.
Structural Integrity and Corrosion
Significant rust on load‑bearing parts, such as the chassis, suspension mounting points or the steering rack, is a failure point. Inspect the under‑carriage for deep rust pits, especially around the wheel arches and suspension arms.
Clocking and Mileage Tampering
Artificially lowering the odometer reading, known as clocking, is illegal and will cause an MOT failure if detected. Look for mismatched mileage records, unusually low wear on the clutch or brakes, and check the service history for consistency.
Seatbelts and Safety Equipment
All seatbelts must retract smoothly and lock on sudden deceleration. Frayed webbing, broken retractors or missing buckles are immediate grounds for failure. Verify each belt by pulling it out fully and letting it snap back.
Windshield and Visibility
Cracks in the driver’s line of sight, chipped windscreen wipers or a faulty washer system will fail the MOT. Ensure the windscreen is clear of obstructive damage and that the wipers clear the glass effectively.
Documentation and Legal Checks
While not a mechanical fault, the MOT test also checks that the vehicle’s registration details match the DVLA records. A mismatched VIN, missing MOT history or a stolen‑vehicle marker (PNC) will cause a failure. Always run a full vehicle check on motorpeek.com before you commit.
How to Avoid Unexpected Failures
Schedule a pre‑sale MOT or a professional inspection. Replace worn brake pads, top up tyre tread, fix any light faults and address minor rust before the official test. A small investment now can save you from a costly failure later.
What Happens After a Failure?
If the vehicle fails, the examiner will provide a list of defects and a retest window of 10 working days. You can either repair the issues yourself or have a garage do it, then arrange a retest. Remember, a vehicle must not be driven on public roads if it has a serious safety defect.
Frequently asked questions
What are the most common reasons for an MOT failure?
The leading causes are brake wear, tyre tread below 1.6 mm, faulty lights, excessive exhaust smoke, and structural rust on load‑bearing parts. Secondary issues include seatbelt defects, windscreen damage and odometer tampering.
Can a MOT failure be fixed before selling a used car?
Yes. Most failures are remedial, such as replacing brake pads, fixing lights or repairing minor rust. After repairs, you can book a retest within ten working days to obtain a pass before the sale.
How can I check if a car has a hidden MOT failure history?
Run a full vehicle history check on motorpeek.com. The service shows past MOT results, mileage records, any outstanding finance and whether the vehicle has been marked as stolen or written‑off.