Why do tyres fail the MOT?
During an MOT the examiner checks that each tyre meets the legal standards for tread depth, condition and size. If a tyre does not meet any of these criteria it will be recorded as a failure and you will need to replace or repair it before the vehicle can pass.
Key legal requirements
UK law requires a minimum tread depth of 1.6 mm across the central three‑quarters of the tyre and across the entire width. The tyre must also be the correct size for the vehicle, free from cuts, bulges, punctures or excessive wear on the sidewalls.
Common reasons for tyre failure
- Insufficient tread depth – The most frequent cause of a tyre failure. Worn tread reduces grip, especially in wet conditions, and is easily measured with a simple tread‑depth gauge.
- Uneven wear – Can indicate alignment issues, incorrect tyre pressure or worn suspension components. If the wear pattern is uneven, the examiner may deem the tyre unsafe.
- Sidewall damage – Cuts, cracks, bulges or repairs that are not performed by a qualified professional can compromise the tyre’s structural integrity.
- Punctures in the tread area – Small punctures can be repaired, but if they are in the sidewall or larger than 6 mm they must be replaced.
- Incorrect tyre size or type – Using a tyre that does not match the vehicle’s specifications on the registration certificate (V5C) is a direct MOT failure.
- Improper tyre pressure – While pressure itself is not measured at MOT, extremely low or high pressure can cause visible damage that leads to a failure.
- Age of the tyre – Tyres older than six years are not automatically failed, but they are scrutinised closely for cracking and dry‑rot.
How to avoid a tyre failure at your MOT
Regular maintenance and a few simple checks can keep your tyres MOT‑ready.
Check tread depth regularly
Use a tread‑depth gauge or the simple “penny test”. Insert a penny with the head of Queen Elizabeth II facing up; if you can see the top of the head, the tread is below the legal limit.
Maintain correct tyre pressure
Check the pressure at least once a month and before long journeys. The recommended pressure is listed on the driver’s side door‑jamb or in the owner’s manual.
Rotate and balance tyres
Rotating tyres every 6‑8 000 miles helps prevent uneven wear. Balancing eliminates vibration that can cause sidewall stress.
Inspect for damage
Look for cuts, embedded objects, bulges or cracking on the sidewalls. Any sign of damage should be assessed by a qualified tyre professional.
Align and suspend correctly
If you notice the vehicle pulling to one side or uneven tread patterns, have the wheel alignment and suspension checked. Proper alignment extends tyre life and keeps wear even.
Replace tyres at the right time
Even if tread depth appears acceptable, replace tyres that are more than six years old, show signs of dry‑rot, or have been repaired multiple times.
By following these steps you reduce the risk of a costly re‑test and keep your car safe on the road.
For peace of mind, you can also run a full vehicle history check on motorpeek.com by entering the registration.
Frequently asked questions
What is the minimum legal tread depth for a tyre to pass the MOT?
The law requires at least 1.6 mm of tread depth across the central three‑quarters of the tyre and across its full width. Anything less will be recorded as a failure.
Can a tyre with a repaired puncture still pass the MOT?
Yes, a puncture in the tread can be repaired by a qualified professional and still pass, provided the repair meets the DVSA standards and the tyre’s overall condition is sound.
How often should I check my tyre pressure before an MOT?
It’s best to check tyre pressure at least once a month and again a few days before your MOT. Correct pressure helps prevent damage that could lead to a failure.